How To Guides > Exinda Topologies > Introduction to Out-of-Path Topologies

Introduction to Out-of-Path Topologies

This section of the help deals with the out-of-path network topologies in which the Exinda Appliances can operate. See the following for more information:

ClosedAccelerate traffic with WCCP

CLI: WCCP

Configure internal subnets as internal network objects

ClosedSPAN and Mirror Port Monitoring

Configure Mirror Port Mode

Enable Monitoring of SPAN/Mirror Traffic

Configure internal subnets as internal network objects

ClosedDirecting traffic with policy-based routing

Basic policy-based routing

Configure the Router for the Basic PBR topology

Configure the out-of-path Exinda Appliance for policy based routing

Configure the Exinda Appliance for Basic PBR topology through the CLI

Policy-based routing with two subnets

Configure the Router for PBR with Two Subnets

Configure the Exinda Appliance for PBR on Two Subnets through the Exinda Web UI

Configure the Exinda Appliance for PBR on Two Subnets through the CLI

VRRP with PBR

Configure the Router for VRRP with PBR

Configure the Exinda Appliance for VRRP with PBR

Configure the Exinda Appliance for VRRP with PBR through the CLI

VRRP with PBR and VLANs

Configure the Switch for VRRP with PBR and VLANs

Configure the Exinda Appliance for VRRP with PBR and VLANs

Configure the Exinda Appliance for VRRP with PBR and VLANs through the CLI

VRRP with PBR and IP SLA Tracking

Configure the Router for VRRP with PBR and IP SLA Tracking

Configure the Exinda appliances for VRRP with PBR and IP SLA Tracking

Configure the Exinda appliances for VRRP with PBR and IP SLA Tracking through the CLI

| Exinda.com

Using the help

Last Updated: Monday, February 1, 2016 at 12:26 PM

Exinda Management Center 2.0 ExOS 7.4.1 | Copyright © 2016 Exinda Networks, Inc.